Evaluation of Human Exposure to Vibrations using Quarter Car Model with Semi-Active Suspension
Main Article Content
Abstract
Exposure of human body to vehicular vibrations in transit may lead to the human discomfort. Ride comfort is one of the major issues in design of automobiles. Magneto rheological (MR) dampers are emerging as most feasible solution for various applications in controlling vibrations. An MR damper is a semi-active device, which will offer the advantages of both active and passive suspension. In this study, the MR damper based semi-active suspension system for a car is analysed for ride comfort of 7 degrees of freedom model human body lumped mass, considering head, upper torso, lower torso and pelvis, seated over a seat of a quarter car model and is compared with that of similar system using passive damper. A MR damper is fabricated and is filled with MR fluid made of Carbonyl iron powder and Silicone oil added with additive. Modified Bouc-Wen Model developed by Spencer is used to model the behaviour of MR damper. All the parameters of this model are identified using data acquired from experiments conducted to characterise MR damper. Further, using the Spencer model of MR damper, the human body seated over quarter car is simulated by implementing a semi-active suspension system for analysing the resulting displacement and acceleration of the human body. The ride comfort performance of vehicle model with passive suspension system is compared with corresponding semi-active suspension system. The simulation and analysis are carried out using MATLAB/SIMULINK.
Article Details
Issue
Section
Articles
Authors who publish with this journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication, with the work two years after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).