Development and Validation of Chassis Mounted Platform Design for Heavy Vehicles
Main Article Content
Abstract
Hand calculations, finite element (FE) analysis and experimental validation of chassis mounted platform design for defence and commercial off-road vehicles have been attempted in this work. The work was commenced with the thorough study of platform configuration, loading pattern, platform mount location and configuration on the vehicle chassis and relevant vehicle characteristics. Calculation of section modulus, shear force and bending moment of various structural members under specified loading has been carried out before proceeding with the FE modeling and analysis of platform. FE model of the chassis mounted platform has been made using shell elements and the boundary conditions have been imposed based on the loading pattern with an assumption of rigid vehicle chassis. Static and gradient analyses of the platform have been carried out for full scale and reduced scale prototype FE models. Experimental strain measurement at critical locations under different static and gradient loads has been carried out for design validation of chassis mounted platform using the scaled prototype. Close correlation has been found between the experimental stress values and FE stress analysis results for static and gradient load conditions. From the entire load tests conducted, it is observed that the strain values in rear portion are less as compared with those in front and mid portions of the platform in-spite of the rear overhang provision.
Article Details
Issue
Section
Articles
Authors who publish with this journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication, with the work two years after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).