Performance of Compression Ignition Engine with Coated Piston for Multiple Blends of Methyl Castor Oil
Main Article Content
Abstract
Fossil fuel is getting exhausted at a fast rate and contributes to high carbon monoxide emissions. Biodiesel, being environmentally friendly, has better performance than diesel. Castor oil is an easily available vegetable oil in India. But its high viscosity leads to blockage of the fuel lines. The amount of free fatty acid more than 1% leads to soap formation which necessitates the biodiesel production in a two step process. The first step of acid catalyzed esterification process reduces the free fatty acid content of castor oil to below 1%. The second step of transesterification process converts the preheated oil to castor biodiesel. This two step process gave a maximum yield of 90%.The methyl castor oil (biodiesel) is blended with diesel in different proportions on volume basis as 15:85 (B15), 25:75 (B25), and 35:65 (B35). These blended oils are used to run a single cylinder four stroke compression ignition engine with different coatings of pistons, to study and compare the engine performance and emission characteristics at different load conditions.
Article Details
Issue
Section
Articles
Authors who publish with this journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication, with the work two years after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).