Passenger Comfort Analysis in an Automotive Considering a Magneto-Rheological Damper based Suspension
Main Article Content
Abstract
Passenger’s comfort in moving vehicles depends on the quality of the ride. The major cause of discomfort is the vibration transmitted to passengers due to the road irregularities. For a comfortable ride on a vehicle, vibration must stay within prescribed standards. In the present work, an attempt was made to show that, the vibrations can be limited with the use of Magneto-rheological (MR) dampers for varying road profiles than the passive damping methods. MR dampers are semi-active control devices that use MR fluids to produce controllable damping force as they are known to exhibit nonlinear behaviour. Multi body dynamic studies were done to study the response of the system using a quarter car model. In this paper, passive damping (viscous damping) was considered at natural frequency of 1.012Hz, the response of damping was observed after 10s and the acceleration was found to be 6m/s2. When MR damper is employed as the magnetic force increases, the response of the damping was better than the passive damping, at 1.2A it comes down to 0.55m/s2, and the vibration gets dampened after 1.75s. Hence, from this study it is concluded that the MR damper can be employed in automobile for better ride comfort.
Article Details
Issue
Section
Articles
Authors who publish with this journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication, with the work two years after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).