Investigation of Hybrid Locomotive Robot for Anti-Personnel Mine Detection
Main Article Content
Abstract
Most of landmine detection robots proposed so far have been strongly restricted from locomotion inside the mine field because they cannot cross over the mine. So we have proposed a mine detection robot with hybrid locomotion, which can enter inside the minefield with low ground surface contact, which can cross over the mine instead of changing its path and scan landmines directly using Electro Magnetic Induction sensor. The hybrid locomotion proposed in the robot uses the frame walking technique and the conventional wheeled locomotion. The robot switches over the locomotion mechanism from wheeled to leg when mine is detected and vice versa with a lead screw mechanism. The leg locomotion is achieved by frame walking technique where the two frames translate with the help of lead screw mechanism. A purpose of adopting this combination is to evade anti-personnel landmines which are relatively smaller in comparison to their anti-tank landmine counterparts. The robot initially starts in wheeled mode and upon detection of metal, pulls in the frame walking algorithm. The robot also deploys an obstacle avoidance algorithm when working in wheel mode.
Article Details
Issue
Section
Articles
Authors who publish with this journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication, with the work two years after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).