Effect of Cenosphere Addition on Mechanical Properties of Bamboo and E-Glass Fiber Reinforced Epoxy Hybrid Composites
Main Article Content
Abstract
Cenosphere is a ceramic-rich industrial waste produced during burning of coal in the thermal power plants. This study deals with the effect of cenosphere as particulate filler on mechanical behaviour of woven bamboo-glass hybrid composites. The hybrid composite consists of bamboo and E-glass fiber as reinforcement and epoxy as matrix. Cenosphere of different weight percentage (0.5, 1, 1.5 and 2 %) was added to the hybrid composite. The samples were tested as per ASTM standards for their mechanical properties to establish the effect of filler content. It is found that the mechanical properties are significantly influenced by addition of waste ceramic filler cenosphere up to 2 wt.% and increases the tensile, flexural and inter-laminar shear strength in comparison to unfilled composite. Finite element analysis is also done using Midas NFX and the simulation results are compared with experimental results. From the results, it has been found that the experimental values obtained from tensile testing and flexure testing nearly matches with finite element values.
Article Details
Issue
Section
Articles
Authors who publish with this journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication, with the work two years after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).