Utilization of Palm Oil as a Lubricant and its Tribological Effect

Main Article Content

Yashvir Singh
Nishant Kumar Singh
Arkom Palamanit
Abhishek Sharma

Abstract

Due to its toxicity, synthetic oil disposal is the main source of environmental pollution. Palm oil is a good replacement for synthetic lubricants in this case. Palm oil and synthetic oil were combined in this investigation at various volume ratios (4%, 8% and 12%). On a Novus tribo tester, the friction and wear properties of the lubricant were examined. Throughout the process, the impact of load was examined. At a constant sliding speed, the load was applied in the range of 40 N to 100 N. Friction rises as the load increases and at 100 N of the load, higher friction was reached. In comparison to other blends, the 8% blend yields superior performance in terms of wear. The 12% blend showed higher friction and wear but the performance is near to the synthetic oil so, further chemical modification will result in improved performance of the lubricant in future.

Article Details

Section
Articles