Investigation of Reduction in Base Drag using Experiment and CFD at Subsonic Speed Regimes
Main Article Content
Abstract
Base drag, arising from flow separation at the blunt base of a body can be a sizeable fraction of total drag in the context of projectiles, missiles and after bodies of fighter aircrafts. The base drag is the major contribution of total drag for low speed regimes, flight tests have shown that the base drag may account for up to 50% of the total drag. Computational and experimental investigation for a hemispherical flight vehicle body of length 500mm and diameter 50mm was conducted for the purpose of investigating the base drag. Three case studies were conducted to investigate the properties of the flow field around the flight vehicle at different flow velocities of 20m/s, 30m/s and 50m/s at zero angle of attack (AoA). The three cases were (i) a flight vehicle with flat base configuration, (ii) a flight vehicle with a nozzle at the base and (iii) a flight vehicle configuration with a boat tail, Fig 1. Also, the three configurations were investigated at different AoA of -2ï‚°, 0ï‚° and +2ï‚°. The base drags for three configurations are calculated and the experimental results are compared with the CFD results.
Article Details
Issue
Section
Articles
Authors who publish with this journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication, with the work two years after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).