Emission Characteristics of Third Grade Oil Converted Sesame Biodiesel
Main Article Content
Abstract
The demand and usage of fossil fuels has been increasing drastically, leading us to search for alternate fuels. The sesame seed is selected as an alternate fuel source, as a focus for this research paper. The sesame biodiesel is a type of fuel that has been obtained through the transesterification process from sesame oil using base catalyst transesterification. The sesame biodiesel was blended with four different ratios B10, B20, B30 and B40, among which B20 resulted with better stability, tested in the Kirloskar 240PE VCR engine at a compression ratio of 17.5:1 and 18:1 in various loads. The FTIR test was performed on sesame biodiesel, and it has shown that ester content was present in the test sample confirming its usage as the biodiesel. The fuel properties were found for all the three: sesame oil, sesame biodiesel(B20), diesel and it was found to be within the permissible limit. The result reveals that B20 is the best possible blend that has given good results in emission characteristics. The smoke emission testing was done on AVL emission analyser. It has been noted and observed that there is good reduction in CO, CO2, and HC than with standard diesel rate at all loads. An increased amount of NOx is observed as the load increases. It was also noted among the two compression ratios, 18:1 depicted best results considering the emission levels. It is observed that the sesame biodiesel can be used in IC diesel engines with a better outcome than the standard diesel rate. Hence, the work established the need for conversion of sesame seed oil to biodiesel and also suggests that sesame oil could be effectively used as feedstock for biodiesel production.
Article Details
Issue
Section
Articles
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms: a. Authors retain copyright and grant the journal right of first publication, with the work two years after publication simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).